A copper‐based reverse atom‐transfer radical polymerization process for the living radical polymerization of polyacrylonitrile

The reverse atom‐transfer radical polymerization (RATRP) technique using CuCl₂/2,2′‐bipyridine (bipy) complex as a catalyst was applied to the living radical polymerization of acrylonitrile (AN). A hexasubstituted ethane thermal iniferter, diethyl 2,3‐dicyano‐2,3‐diphenylsuccinate (DCDPS), was firstly used as the initiator in this copper‐based RATRP initiation system. A CuCl₂ to bipy ratio of 0.5 not only gives the best control of molecular weight and its distribution, but also provides rather rapid reaction rate. The rate of polymerization increases with increasing the polymerization temperature, and the apparent activation energy was calculated to be 57.4 kJ mol^?1. Because the polymers obtained were end‐functionalized by chlorine atoms, they were used as macroinitiators to proceed the chain extension polymerization in the presence of CuCl/bipy catalyst system via a conventional ATRP process. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 226–231, 2006     

Synthesis of polyacrylonitrile via reverse atom transfer radical polymerization catalyzed by FeCl3/isophthalic acid

FeCl₃ coordinated by isophthalic acid was first used as a catalyst in the azobisisobutyronitrile‐initiated reverse atom transfer radical polymerization of acrylonitrile. N,N‐Dimethylformamide was used as a solvent to improve the solubility of the ligand. An FeCl₃‐to‐isophthalic acid ratio of 0.5 not only gave the best control of the molecular weight and its distribution but also provided rather a rapid reaction rate. The effects of different solvents on the polymerization of acrylonitrile were also investigated. The rate of the polymerization in N,N‐dimethylformamide was faster than that in propylene carbonate and toluene. The molecular weight of polyacrylonitrile agreed reasonably well with the theoretical molecular weight in N,N‐dimethylformamide. The rate of polymerization increased with increasing polymerization temperature, and the apparent activation energy was calculated to be 59.9 kJ mol^?1. Reverse atom transfer radical polymerization was first used to successfully synthesize acrylonitrile polymers with a molecular weight higher than 80,000 and a narrow polydispersity as low as 1.22. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 219–225, 2006     

4,4’-二苯甲酰基联苯构象的分子力学研究

4,4’—二苯甲酰基联苯有两个三岔点,属于二元三岔共轭体系。从结构式上看,卽可把它作为二苯甲酮骨架的取代产物,又可看作是在联苯骨架上的取代。作为系统研究三岔共轭体系结构效应的部分工作,我们用QCFF/PI+MCA(Quantum Mechanical Extension of the Consistent Force Field to PI Electron System+Molecular Crystal Analysis)程序研究了其晶态和孤立态(气态)构象。研究结果表明,在孤立态中,联苯基的二个苯环的最小二乘     

双甲基丙烯酰氧苯基丙烷与苯乙烯共聚物的光学性能

标题共聚物的耐冲击性与丙烯酸酯均聚物相比有明显改善,但随着双烯单体含量的降低,共聚物的耐热性和表面硬度有所下降。丙烯酸酯含量为70%的共聚物的吸收紫外光能力最强(<370nm全吸收),含量为5%～10%的共聚物耐吸水性、耐酸耐碱性及耐冲击性最好。     

大孔膦酸树脂吸附镧的研究

本文测定了大孔膦酸树脂对La3 的吸附容量，介质pH、温度、吸附时间等因素对吸附的影响。测得吸附速率常数K298＝7．64×10－5S－1，树脂功能基与La3 的络合比为3：1，用化学及红外光谱等方法，得到大孔磷酸树脂吸附La3 的基本参数及其机理。     

TNFa在血管内皮细胞ECV304中的靶向表达研究

在缺失了3'LTR U3区内病毒的启动子／增强子序列的逆转录病毒载体pLXSNd中,用血管内皮生长因子受体KDR的特异性启动子调控了TNFa在血管内细胞ECV304中的靶向表达。将构建的载体pLXSN-TNFa,pLXSNd-KDRp-TNFa和空载体pLXSN用PA317细胞包装后获得重组病毒,并用重组病毒分别感染NIH3T3细胞和ECV304细胞,培养物上清的ELISA结果证明,KDR启动子指导的TNFa在KDR阳性细胞ECV304中的表达量为在KDR阴性细胞NIH3T3中的表达量的8倍;而TR指导的TNFa在这两种细胞中的表达无明显差异,实现了TNFa在血管内皮细胞中的靶向表达,这可能为肿瘤基因治疗提供新途径。     

用模糊综合评价值作为单纯形优化指标

本文介绍了一个模糊综合评价方法,讨论了模糊运算方法对运算结果即综合评价值的影响,并将模糊综合评价值用作单纯形优化指标。     

β-羧基乙基锗倍半氧化物及其衍生物

本文综述了β-羧基乙基锗倍半氧化物及其衍生物的生物活性、合成方法以及该领域最新研究动向。     

用透射积分法研究的穆斯堡尔谱学——一个在聚合二茂铁研究中的应用

本文利用透射积分法，在聚合二茂铁研究中发现，这种方法不但能够得到超精细参数，而且能够得到一般拟合方法得不到的另外两个重要参数—样品的无反冲分数和相应的德拜温度，由此能进一步了解到样品在结合中晶格的质量及化学键的强弱，为穆斯堡尔谱研究提供了一条新的途径。     

Effect of Deposition in Deep-Bed Filtration: Determination and Search of Rate Parameters

Particle deposition in deep-bed filters (porous media) is, by nature, an unsteady-state process and the extent of deposition plays an important role in determining filter performance. A general method of establishing the relationship between deposition rate and the extent of deposition from effluent concentration history of filters is presented. The efficacy of the method is examined and its utility demonstrated through its applications to certain experimental data. Copyright 2000 Academic Press.